LUBE
AMI-200S
Automatic intermittent gear pump
 
Directions for use
● Replace or clean the suction filter once a year.
● Since the viscosity of oil changes depending on the oil temperature in summer and winter, be careful to use it within the operating viscosity range. Please see the viscosity table.
● Do not use special additive oil, water-soluble oil or solvent.
● Regularly inspect the oil in use for contamination, etc. If any are found, immediately flush the tank and replace it with new oil.
● Please be careful about mistakes such as voltage.
● Do not overtighten the outlet fitting. Please refer to the tightening torque chart.
● Check the rotation direction of the motor. Do not turn the pump upside down or sideways.
● If you want to increase the length of the suction, please contact our Global Center. (If using an oil level switch, please consult with the length.)